Products

26x3 Channeled Rim - bring a little more edge to your wheel setup. Dual channels run the full length of the hoop, adding visual depth. Single-wall aluminum construction 26" x 3" size (36-hole) Drilled for 13 gauge spokes  Hoop only – sold individually Currently...

Acorn Style Axle nut Protect your axle threads while adding a clean, finished look to your build. Made for 3/8" (9.5mm) 26 TPI.  Sold individually. Be sure to check your axle size before ordering.

Mid to American bottom bracket cups Bearings and crankset sold separately 6061 T6 Aluminum

Tooth count - 44 Material 6061 T6 Aluminum Overall thickness - 0.73 inch Finish - Polished Aluminum Requires 1/2 x 1/8 chain (Will not work with 3/16 chain) *Some modification may be required for fitment.

Tooth Count - 44 Designed for 3 piece cranks with 19mm spindle Material - 6061 -T6 Aluminum Overall thickness - 0.73 inch Finish - Polished Aluminum Requires 1/2 x 1/8 chain (Will not work with 3/16 chain)

Made out of 6061 T6 Aluminum Weight - 15.1 oz Dimensions - 1" Thick, 4"x4" excluding spindle Available in 9/16 only Low-maintenance sealed bearings Non-slip studs on both sides

Keep that workspace looking clean with our Lawless billet coasters, available in round or square. Fits drink sizes up to 3 inches.  Coaster item quantity is sold in pairs. 

6061 T6 Aluminum 2-7/8 inch drink diameter 3-1/4 tall, 7-3/8 wide. Fits up to 24oz tall cans

Billet front hub 36h - Perfect match for our any of our standard width forks. 100mm O.L.D (Over-Lock-nut Distance) 140mm Axle Length Axle diameter: 9.5mm (3/8") 3” P.C.D (76.2mm)  2.5" Flange to flange Fits 13G spokes Material: Billet aluminum body, CrMo Steel axle Finish:...

Slotted Billet Grips  CNC’d from 6061-T6 aluminum, with a clear anodized finish for protection. They’re lightweight at just 4.5 oz each. Designed for 7/8” handlebars. Two-piece design with a threaded end cap brings that seamless, custom-machined look to your build. 📏 Specs:✔ Material: 6061-T6 Billet...

Spare End Caps for our Billet Grip series. These spare end caps are made from 6061 aluminum and fit any of our billet grips. Sold in pairs. Available in multiple styles so you can change up the look, or replace a missing cap.

Split-Line🪓 CNC’d from 6061-T6 aluminum, with a clear anodized finish for protection. Designed for 7/8” handlebars / 22.2mm. Two-piece design with a threaded end cap brings that seamless, custom-machined look to your build. 📏 Specs:✔ Material: 6061-T6 Billet Aluminum✔ Fitment: 7/8” handlebars✔ Mounting: Dual set...

Stinger⚡️ CNC’d from 6061-T6 aluminum, with a clear anodized finish for protection. Designed for 7/8” handlebars / 22.2mm. Two-piece design with a threaded end cap brings that seamless, custom-machined look to your build. 📏 Specs:✔ Material: 6061-T6 Billet Aluminum✔ Fitment: 7/8” handlebars✔ Mounting: Dual set...

Designed to be fitted onto Sinner Triple Trees CNC machined out of 6061 aluminum Finishing: Raw Machined Finish Slotted hole measure 0.40 inch

Made out of 6061 T6 Aluminum 1.65 inch OD  Designed to fit 1.5 thin (0.065) wall tubing  Select STYLE E for spike style

Machined out of 6061 Aluminum Designed to fit 1.25 square tube legs *Some modification may be required for fitment.

Our Bock-Style stem was designed as a solution for those needing different combinations of headset and bar sizes. Whether you want to run a 1" handlebar or have a 1" threadless headset, our block-style stem will have you covered. Designed for threadless headsets Material:...

Our Bock-Style 2 stem was designed as a solution for those needing different combinations of headset and bar sizes. Whether you want to run a 1" handlebar or have a 1" threadless headset, our block-style stem will have you covered. Designed for threadless headsets...

Tooth Count - 44 Designed for 3 piece cranks with 19mm spindle Material - 6061 - T6 Aluminum Overall thickness - 0.73 inch Finishing - Polished Aluminum Requires 1/2 x 1/8 chain (Will not work with 3/16 chain)

American Bottom bracket kit. For use on frames with American bottom bracket shells. American/US bottom bracket (silver or black) Sealed bearings Includes: 2 cups (silver or black) 2 sealed bearings 1 tube spacer 2 cone washers 7 flat washers *Crank arms/spindle not included

Crank bearing Dust Cover / Spacer Replaces plastic dust cover on bottom bracket Available in 1/8", 1/4", 3/8", 1/2" & 3/4" Price is for one spacer only Material - 6061 T6 Billet Aluminum F inish - Raw machined Aluminum

2 American/US Bottom bracket cups (silver or black) 19mm dia 8-spline spindle 150mm spindle length Sealed bearings 1 tube spacer 2 bottom bracket spacers/dust covers 7 flat washers Crank hardware included *Crank arms not included

Wheel of the Month - Prismatic Bronze 26x3"Built around a Shimano Nexus 3-speed hub and finished in Prismatic Bronze Chrome (PMB-4124). This color delivers a deep metallic glow in the sunlight with a show-quality finish. *One set only Size: 26" x 3" front and...