Products
-
(Blemished) Bronze Wheel Set 26x3” – Nexus 3-Speed
Bronze 26x3" - Blemished Set Front Wheel: one 3/4" surface scratch. Rear Wheel: small 1/2" finish imperfection where the powdercoat didnt cure evenly. Both wheels are brand new otherwise. Built around a Shimano Nexus 3-speed hub and finished in Prismatic Bronze Chrome (PMB-4124). This...- $300.00
$420.00- $300.00
- Unit price
- per
-
26" x 3" - Blank (No spoke holes)
26x3 Blank Channeled Rim - For the builders who want total freedom, this blank version of our 26x3 channeled rim comes with zero spoke holes, letting you drill your own custom patterns. Whether you're doing radial, offset, multi-cross or just experimenting with a new...- $50.00
- $50.00
- Unit price
- per
-
26" x 3" - 36h - Hoop only Brushed
26x3 Channeled Rim - bring a little more edge to your wheel setup. Dual channels run the full length of the hoop, adding visual depth. Single-wall aluminum construction 26" x 3" size (36-hole) Drilled for 13 gauge spokes Hoop only – sold individually Currently...- $50.00
- $50.00
- Unit price
- per
-
Brushed
-
Silver
-
Black
-
Acorn Axle Nut
Acorn Style Axle nut Protect your axle threads while adding a clean, finished look to your build. Made for 3/8" (9.5mm) 26 TPI. Sold individually. Be sure to check your axle size before ordering.- $10.00
- $10.00
- Unit price
- per
-
American BB Cups Black
Mid to American bottom bracket cups Bearings and crankset sold separately 6061 T6 Aluminum- $13.00
- $13.00
- Unit price
- per
-
Black
-
Silver/raw
-
Antwerp Sprocket
Tooth count - 44 Material 6061 T6 Aluminum Overall thickness - 0.73 inch Finish - Polished Aluminum Requires 1/2 x 1/8 chain (Will not work with 3/16 chain) *Some modification may be required for fitment.- $165.00
$0.00- $165.00
- Unit price
- per
-
Badland Sprocket
Tooth Count - 44 Designed for 3 piece cranks with 19mm spindle Material - 6061 -T6 Aluminum Overall thickness - 0.73 inch Finish - Polished Aluminum Requires 1/2 x 1/8 chain (Will not work with 3/16 chain)- $165.00
- $165.00
- Unit price
- per
-
Big Dog Pedals
Made out of 6061 T6 Aluminum Weight - 15.1 oz Dimensions - 1" Thick, 4"x4" excluding spindle Available in 9/16 only Low-maintenance sealed bearings Non-slip studs on both sides- $165.00
- $165.00
- Unit price
- per
-
Billet coasters set
Keep that workspace looking clean with our Lawless billet coasters, available in round or square. Fits drink sizes up to 3 inches. Coaster item quantity is sold in pairs.- $19.00
- $19.00
- Unit price
- per
-
Billet Dual Cup Holder
6061 T6 Aluminum 2-7/8 inch drink diameter 3-1/4 tall, 7-3/8 wide. Fits up to 24oz tall cans- $88.00
- $88.00
- Unit price
- per
-
Billet Front hub 36h - 100mm
Billet front hub 36h - Perfect match for our any of our standard width forks. 100mm O.L.D (Over-Lock-nut Distance) 140mm Axle Length Axle diameter: 9.5mm (3/8") 3” P.C.D (76.2mm) 2.5" Flange to flange Fits 13G spokes Material: Billet aluminum body, CrMo Steel axle Finish:...- $199.00
- $199.00
- Unit price
- per
-
Billet Grips - Slotted
Slotted Billet Grips CNC’d from 6061-T6 aluminum, with a clear anodized finish for protection. They’re lightweight at just 4.5 oz each. Designed for 7/8” handlebars. Two-piece design with a threaded end cap brings that seamless, custom-machined look to your build. 📏 Specs:✔ Material: 6061-T6 Billet...- $120.00
- $120.00
- Unit price
- per
-
Billet Grips - Spare End Caps
Spare End Caps for our Billet Grip series. These spare end caps are made from 6061 aluminum and fit any of our billet grips. Sold in pairs. Available in multiple styles so you can change up the look, or replace a missing cap.- $39.00
- $39.00
- Unit price
- per
-
Billet Grips - Split-line
Split-Line🪓 CNC’d from 6061-T6 aluminum, with a clear anodized finish for protection. Designed for 7/8” handlebars / 22.2mm. Two-piece design with a threaded end cap brings that seamless, custom-machined look to your build. 📏 Specs:✔ Material: 6061-T6 Billet Aluminum✔ Fitment: 7/8” handlebars✔ Mounting: Dual set...- $120.00
- $120.00
- Unit price
- per
-
Billet Grips - Stinger
Stinger⚡️ CNC’d from 6061-T6 aluminum, with a clear anodized finish for protection. Designed for 7/8” handlebars / 22.2mm. Two-piece design with a threaded end cap brings that seamless, custom-machined look to your build. 📏 Specs:✔ Material: 6061-T6 Billet Aluminum✔ Fitment: 7/8” handlebars✔ Mounting: Dual set...- $120.00
- $120.00
- Unit price
- per
-
Billet Headlight bracket (Sinner)
Designed to be fitted onto Sinner Triple Trees CNC machined out of 6061 aluminum Finishing: Raw Machined Finish Slotted hole measure 0.40 inch- $55.00
$0.00- $55.00
- Unit price
- per
-
Billet Round Fork Caps
Made out of 6061 T6 Aluminum 1.65 inch OD Designed to fit 1.5 thin (0.065) wall tubing Select STYLE E for spike style- From $45.00
- From $45.00
- Unit price
- per
-
Billet Square Fork Caps
Machined out of 6061 Aluminum Designed to fit 1.25 square tube legs *Some modification may be required for fitment.- $50.00
$0.00- $50.00
- Unit price
- per
-
Block Style 1 Stem
Our Bock-Style stem was designed as a solution for those needing different combinations of headset and bar sizes. Whether you want to run a 1" handlebar or have a 1" threadless headset, our block-style stem will have you covered. Designed for threadless headsets Material:...- $69.00
- $69.00
- Unit price
- per
-
Block Style 2 Stem
Our Bock-Style 2 stem was designed as a solution for those needing different combinations of headset and bar sizes. Whether you want to run a 1" handlebar or have a 1" threadless headset, our block-style stem will have you covered. Designed for threadless headsets...- $69.00
- $69.00
- Unit price
- per
